Intermediate Case: Assembly

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Install the reverse brake. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>REVERSE BRAKE>ASSEMBLY .
Install the plugs with new O-rings.
NOTE: Apply CVTF to the O-rings.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 1: Plugs With Torque Specification
Courtesy of SUBARU OF AMERICA, INC.
Temporarily install the filler plug.
NOTE: Replace the filler plug gasket with a new part after adjusting the level of CVTF.

Courtesy of SUBARU OF AMERICA, INC.
Install the parking support.
Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)