Primary Pressure Sensor: Installation

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If water or oil contacts the connector terminal of primary pressure sensor, replace it with a new part.

Install a new O-ring.
NOTE: Apply CVTF to the O-rings.
Install the primary pressure sensor and connect the connector.
Tightening torque:

13 N.m (1.3kgf-m, 9.6ft-lb)
Install the transmission body.CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION