Secondary Speed Sensor: Installation

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If water or oil contacts the connector terminal of secondary speed sensor, replace it with a new part.

Install the secondary speed sensor using a new O-ring, and connect the connector.
NOTE: Apply CVTF to the O-rings.

Tightening torque:

7 N.m (0.7kgf-m, 5.2ft-lb)
Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TRANSMISSION ASSEMBLY>INSTALLATION .