FixVault
Home › Subaru › 2025 › Forester Wilderness › Repair and Diagnosis › External Pages › Different car › Section 12 (Airbag System) › Impact Sensor › Removal › Front Impact Sensor

Front Impact Sensor

WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the air intake duct. (When removing the sensor RH) Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  4. Remove the front impact sensor.
    1. Remove the bolt, and remove the front impact sensor.
    2. Disconnect the connector of front impact sensor. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>EACH IMPACT SENSOR .
      G13200670Courtesy of SUBARU OF AMERICA, INC.
      G13200671Courtesy of SUBARU OF AMERICA, INC.
About FixVault