Front Turn Signal Light Bulb: Installation
WARNING: This page is about a different car, the 2023 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
- Install the front turn signal light bulb.
- Install the bulb socket.
- Install the clip of the holder windshield washer tank. (When the front turn signal light bulb LH was removed)
- Install the air intake duct. (When the front turn signal light bulb RH was removed) Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .