Spot Map Light: Inspection

WARNING: This page is about a different car, the 2024 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Courtesy of SUBARU OF AMERICA, INC.

Light switch

Terminal No.	Inspection conditions	Standard
1 - 13	Switch OFF	1 MΩ or more
1 - 13	Switch ON	Approx. 18 Ω

Door switch

Terminal No.	Inspection conditions	Specification
1 - 4	Switch door	Continuity exists

Apply battery voltage between the connector terminals to check the lighting condition of the light.

CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side. Incorrect polarity connection may cause LED damage inside the switch.

Terminal No.	Inspection conditions	Standard
1 (+) - 13 (-) 1 (+) - 4 (-)	Switch OFF	Light OFF
	Switch ON	Light ON
	Switch door	Light ON

Replace the cover assembly stereo camera if faulty is found in the inspection.