Stabilizer Bushing
CAUTION:
- Install the rubber bushing front stabilizer so that the slit does not shift to the right or left.
- For Crosstrek model, install the clamp stabilizer with the anti-dislocation flange facing the outside of the vehicle.
- Install the clamp stabilizer with the peak of triangle facing the front of the vehicle.
NOTE:
- The rubber bushing front stabilizer can be used with its slit facing either front or rear.
- For Crosstrek model, the left and right clamp stabilizers differ in shape.
- Before installation, check the rubber bushing front stabilizer for abnormal cracks, damage or fatigue.
If any is found, replace the part with a new one.
- Install the rubber bushing front stabilizer.
- Install the clamp stabilizer.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>INSTALLATION .