Rearview Camera Assembly

NOTE: Press-in the rearview camera until a locking sound is heard.

Sedan model
1. Install the rearview camera assembly.
2. Install the trim panel trunk lid. Ref. to EXTERIOR/INTERIOR TRIM>TRUNK ROOM TRIM>INSTALLATION .
3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
4. Confirm the display and the guide line position, and adjust them as necessary.
  - Model without front view camera
    Screen display: Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CUSTOMIZE .
    
    Guide line position: The rearview camera or its installation location on the vehicle may be deformed. Check the rearview camera assembly and its installation location on the vehicle, and repair or replace if necessary.
  - Model with front view camera
    Screen display: Ref. to MULTI VIEW MONITOR (DIAGNOSTICS)>CUSTOMIZE .
    
    Guide line position: Ref. to MULTI VIEW MONITOR (DIAGNOSTICS)>WORK SUPPORT .
OUTBACK model/WILDERNESS model
1. Install the rearview camera assembly.
2. Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
3. Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
5. Confirm the display and the guide line position, and adjust them as necessary.
  - Model without front view camera
    Screen display: Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CUSTOMIZE .
    
    Guide line position: The rearview camera or its installation location on the vehicle may be deformed. Check the rearview camera assembly and its installation location on the vehicle, and repair or replace if necessary.
  - Model with front view camera
Screen display: Ref. to MULTI VIEW MONITOR (DIAGNOSTICS)>CUSTOMIZE .

Guide line position: Ref. to MULTI VIEW MONITOR (DIAGNOSTICS)>WORK SUPPORT .