Rear Window Switch: Notes
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the appropriate rear Window switch.
- Test for infinite resistance between the signal terminals 4 and 1 and the B+ circuit terminal 5 with the switch in the INACTIVE position.
- If less than infinite resistance, replace the appropriate rear Window switch.
- Test for less than 2 ohms of resistance between the signal terminal 4 and the B+ circuit terminal 5 with the switch in the UP position.
- If greater than 2 ohms, replace the appropriate rear Window switch.
- Test for less than 2 ohms of resistance between the signal terminal 1 and the B+ circuit terminal 5 with the switch in the DOWN position.
- If greater than 2 ohms, replace the appropriate rear Window switch.