FixVault
Home › Suzuki › 1987 › Samurai Base › Repair and Diagnosis › External Pages › Different car › Section 17 (Heater And Ventilation) › Repair Instruction › Recirculation Actuator Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the recirculation actuator with the door shaft and rotate into position.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the recirculation actuator screws to the HVAC module.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  3. Connect the electrical connector to the recirculation actuator.
  4. Cycle the ignition and verify proper operation.
  5. Install the instrument panel upper trim panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT .
About FixVault