FixVault
Home › Suzuki › 1987 › Samurai Base › Repair and Diagnosis › External Pages › Different car › Section 17 (Heater And Ventilation) › Repair Instruction › Recirculation Actuator Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Recirculation Actuator Screws
G04844449Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the instrument panel upper trim panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT .
  2. Disconnect the electrical connector from the recirculation actuator.
  3. Remove the recirculation actuator screws from the HVAC module.
  4. Remove the recirculation actuator from the HVAC module.
About FixVault