FixVault
Home › Suzuki › 1987 › Samurai Base › Repair and Diagnosis › External Pages › Different car › Section 17 (Heater And Ventilation) › Repair Instruction › Windshield Defroster Duct Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the windshield defrost duct seals. If damaged, replace using Kent Industries adhesive back foam tape P/N 46485 or equivalent.
  2. Install the windshield defrost duct to the HVAC module.
  3. Install the instrument panel upper trim panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT .
About FixVault