FixVault
Home › Suzuki › 1987 › Samurai Base › Repair and Diagnosis › External Pages › Different car › Section 39 (Engine Mechanical) › Repair Instructions › Fuel Injector Sight Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Cover On Ball Studs
G04841444Courtesy of SUZUKI OF AMERICA CORP.
  1. Push downward on cover and lock into place on ball studs.
  2. Install the oil fill cap.
About FixVault