FixVault
Home › Suzuki › 1987 › Samurai Base › Repair and Diagnosis › External Pages › Different car › Section 52 (Engine Lubrication System) › Repair Instructions › Oil Pump Suction Pipe and Screen Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Pan Scraper Bolts With Scraper
G04842506Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the oil pan. Refer to Removal Procedure .
  2. Remove the oil pan scraper bolts.
  3. Remove the oil pan scraper.
    Fig 2: Identifying Oil Suction Pipe Bolts With Suction Pipe
    G04842507Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the oil suction pipe bolts.
  5. Remove the oil suction pipe.
    Fig 3: Identifying Oil Suction Tube Seal
    G04842508Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.
About FixVault