FixVault
Home › Suzuki › 1997 › Sidekick JS, 2D Utility, Automatic › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Circuit Testing › Indicator Light Circuit Check

Indicator Light Circuit Check

  1. Ensure ignition is off. Disconnect harness connector at CC ECU. Turn ignition on. Using voltmeter, check voltage between ground and CC ECU harness connector terminal No. 17 (Gray wire). SeeFigure . Voltage should be 10-14 volts.
  2. If voltage is not within specification, check fuses, wiring and harness connectors. See appropriate wiring diagram under WIRING DIAGRAMS  . Repair fuses, wiring or harness connectors as necessary. If fuses, wiring and harness connectors are okay, replace indicator light bulb.
About FixVault