FixVault
Home › Suzuki › 1997 › Sidekick JS, 2D Utility, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Circuit Testing › Cruise Control Actuator Circuit Check

Cruise Control Actuator Circuit Check

  1. Ensure ignition is off. Disconnect harness connector at CC ECU. Using ohmmeter, check resistance between CC ECU harness connector terminals No. 3 (Yellow/Green wire) and terminal No. 7 (Yellow/White wire). SeeFigure . Resistance should be 12-18 ohms.
  2. If resistance is not within specification, check wiring and harness connectors. See appropriate wiring diagram under WIRING DIAGRAMS  . Repair wiring or harness connectors as necessary.
  3. If wiring and harness connectors are okay, check cruise control actuator. See CRUISE CONTROL ACTUATOR TEST  under COMPONENT TESTS.
About FixVault