FixVault
Home › Suzuki › 2004 › Swift + › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Wheel Speed Sensor Replacement - Rear › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable.
    2. NOTE: Refer to Vehicle Lifting and Jacking Notice in Cautions and Notices.
  2. Raise and suitably support the vehicle.
  3. Disconnect the electrical connector for the rear wheel speed sensor from the rear axle.
    Fig 1: View of Rear Wheel Speed Sensor
    GM1245749Courtesy of GENERAL MOTORS CORP.
  4. Remove the mounting bolt from the rear wheel speed sensor.
  5. Remove the cable grommets from the rear wheel speed sensor, and remove the speed sensor.
About FixVault