FixVault
Home › Suzuki › 2004 › Swift + › Repair and Diagnosis › Engine Performance › System › Engine Controls - 1.6L (L91) (Introduction) › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View of Manifold Absolute Pressure Sensor Electrical Connector
    GM1348510Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the manifold absolute pressure (MAP) sensor electrical connector.
  3. Remove the MAP sensor bolt.
  4. Remove the MAP sensor.
About FixVault