FixVault
Home › Suzuki › 2004 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 12 (Theft Deterrent System) › Repair Instructions › Programming Theft Deterrent System Components (Tech 2) › Immobilizer Programming Procedure

Immobilizer Programming Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the ON position.
  2. Install the scan tool.
  3. Select IMMOBILIZER PROGRAMMING FUNCTION from the BODY menu.
  4. Follow the scan tool instructions with each key until all keys are programmed.
  5. Cycle the ignition 3 times as indicated by the scan tool.
  6. Turn the ignition to the LOCK position, disconnect the scan tool and test all the keys.
  7. If any key does not function, perform this procedure again with all keys.
  8. If any key does not accept the programming, replace it with a new key and perform this procedure again with all the keys.
About FixVault