FixVault

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Clock Spring, Steering Shaft & Screws
    GM1252024Courtesy of GENERAL MOTORS CORP.
  1. Install the clock spring to the steering shaft. Refer to Inflatable Restraint Steering Wheel Module Coil Centering in Steering Wheel and Column.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the new screws.

    Tighten:  Tighten the clock spring screws to 3 N.m (27 lb in).

  4. Connect the driver air bag, horn, and connectors to the lower steering column.
  5. Install the driver side knee bolster or instrument panel lower cover.
  6. Install the upper and lower steering column covers, and install the screws.
  7. Install the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column.
  8. Install the driver air bag module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  9. Connect the negative battery cable.