FixVault
Home › Suzuki › 2004 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 5 (Lighting Systems) › Repair Instructions › Headlamp Replacement (Notchback) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Suzuki Swift +, 2005 Pontiac Wave, and 2005 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Headlamp Assembly and Bulb (Notchback)
    GM1248412Courtesy of GENERAL MOTORS CORP.
  1. Install the headlamp bulb.
  2. Install the retaining wire.
  3. Connect the headlamp bulb electrical connector.
  4. Install the cap concealing the headlamp bulb.
    5. Fig 2: View of Headlamp and Mounting Bolts (Notchback)
    GM1248410Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connectors.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the headlamp assembly with the bolts.

    Tighten:  Tighten the headlamp assembly bolts to 6 N.m (53 lb in).

  7. Install the radiator grille.
About FixVault