FixVault
Home › Suzuki › 2004 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 65 (Lighting Systems) › Repair Instructions › Stop Lamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Stop Lamp Switch
    GM1537922Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the stoplamp switch electrical connector.
  3. Twist the switch, and remove the switch from the brake pedal bracket.
About FixVault