FixVault
Home › Suzuki › 2005 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 47 (Cruise Control System) › Repair Instructions › Cruise Control Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cruise Control Switch
    GM1650882Courtesy of GENERAL MOTORS CORP.
  1. Connect the cruise control switch connector.
  2. Install the cruise control switch and the screws.
  3. Connect the negative battery cable.
About FixVault