FixVault
Home › Suzuki › 2006 › Reno Premium, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Engine Electrical Devices › Knock Sensor Removal and Installation › Installation

Knock Sensor Removal and Installation: Installation

  1. Install the knock sensor with the bolt.

    Tighten: 

    Tighten the knock sensor bolt to 20 N.m (15 lb-ft).

  2. Connect the electrical connector at the knock sensor.
  3. Lower the vehicle.
  4. Connect the negative battery cable.
About FixVault