FixVault
Home › Suzuki › 2006 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 59 (Keyless Entry System & Remote Functions) › Repair Instructions › Remote Control Door Lock Receiver Replacement (Hatchback) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Control Module/Receiver
    GM1252096Courtesy of GENERAL MOTORS CORP.
  1. Install the control module/receiver on its mounting bracket.
  2. Connect the control module/receiver electrical connector.
  3. Install the floor console. Refer to Front Floor Console Replacement (Notchback) or Front Floor Console Replacement (Hatchback) .
  4. Connect the negative battery cable.
  5. Complete remote keyless transmitter programmming. Refer to Transmitter Programming 
About FixVault