FixVault
Home › Suzuki › 2006 › Verona Base › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instructions › VIS Valve Removal

VIS Valve Removal

  1. Disconnect the negative battery cable.
  2. Disconnect the vacuum hose from the VIS actuator.
  3. Remove the VIS actuator and the VIS valve.
    NOTE: Make sure the VIS valve flap is closed before removing the VIS valve.
    Fig 1: Removing/Installing VIS Actuator, Valve And Retaining Bolts
    G04718843Courtesy of SUZUKI OF AMERICA CORP.
About FixVault