FixVault
Home › Suzuki › 2006 › XL-7 Base, RWD, Automatic › Repair and Diagnosis › Engine Mechanical › Starter › Starting System › Diagnostic Information & Procedures › Starting Motor Performance Test › Pull-In Test

Pull-In Test

  1. Connect battery to magnetic switch as shown.
  2. Check that plunger and pinion move outward. If plunger and pinion don't move, replace magnetic switch.
NOTE: Before testing, disconnect lead wire from terminal "M".
Fig 1: Identifying Terminal S, Terminal M & Lead Wire
G04721578Courtesy of SUZUKI OF AMERICA CORP.
About FixVault