FixVault
Home › Suzuki › 2007 › Aerio Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instruction › Engine Coolant Temperature (ECT) Sensor Removal and Installation › Removal

Engine Coolant Temperature (ECT) Sensor Removal and Installation: Removal

  1. Disconnect negative cable from battery.
  2. Drain coolant referring to COOLING SYSTEM FLUSH AND REFILL .
  3. Disconnect connector from ECT sensor (1).
    Fig 1: Disconnecting Connector From ECT Sensor
    G04589661Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove ECT sensor from water outlet cap.
About FixVault