FixVault
Home › Suzuki › 2007 › Grand Vitara Base, AWD, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instructions › Knock Sensor Removal And Installation › Removal

Knock Sensor Removal And Installation: Removal

  1. Disconnect negative cable at battery.
  2. Remove intake manifold from cylinder head referring to INTAKE COLLECTOR AND INTAKE MANIFOLD REMOVAL AND INSTALLATION .
  3. Disconnect knock sensor connector (1).
  4. Remove knock sensor (2) from cylinder block.
    Fig 1: Locating Knock Sensor On Cylinder Block
    G04807282Courtesy of SUZUKI OF AMERICA CORP.
About FixVault