FixVault
Home › Suzuki › 2007 › SX4 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instructions › Camshaft Position (CMP) Sensor Removal and Installation › Installation

Camshaft Position (CMP) Sensor Removal and Installation: Installation

  1. Install CMP sensor to cylinder head cover.

    Tightening torque 

    CMP sensor bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft) 

    Fig 1: Identifying CMP Sensor And Bolt
    G04846721Courtesy of SUZUKI OF AMERICA CORP.
  2. Connect connector to CMP sensor securely.
  3. Install air cleaner case referring to AIR CLEANER ASSEMBLY REMOVAL AND INSTALLATION .
  4. Connect negative cable to battery.
About FixVault