FixVault
Home › Suzuki › 2007 › Swift + › Repair and Diagnosis › External Pages › Different car › Section 9 (Lighting Systems) › Repair Instructions › Lamp Control Module Replacement › Replacement Procedure

Replacement Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Lamp Control Module
    GM1376092Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the instrument panel low cover.
  3. Remove the screws and the lamp control module.
  4. Disconnect the electrical connector.
About FixVault