FixVault
Home › Suzuki › 2007 › XL7 Base, AWD › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wipers/Washers › Repair Instructions › Wiper Motor Module Grommet Replacement › Installation Procedure

Installation Procedure

NOTE: The metal bushing inserts need to be installed with the flat side underneath the module bolts.
Fig 1: Identifying Wiper Motor Grommets & Bushings
G04845212Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the grommets and the bushings to the module.
  2. Install the front wiper motor. Refer to WIPER MOTOR MODULE REPLACEMENT .
About FixVault