FixVault

Removal Procedure

  1. Remove the rear door outside handle. Refer to REMOVAL PROCEDURE .
  2. Remove the rear door window run channel assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the rear door lower speaker. Refer to RADIO REAR SIDE DOOR SPEAKER REPLACEMENT .
  4. Disconnect the electrical connector rosebuds.
    Fig 1: Removing Window Regulator Module Into Door
    G04845314Courtesy of SUZUKI OF AMERICA CORP.
  5. Loosen the 2 rear module bolts.
  6. Remove the 4 remaining module bolts.
  7. Remove the 3 latch bolts from the door shut face.
  8. Disconnect the door harness at the door jamb.
  9. Remove the window regulator module from the door.