FixVault
Home › Suzuki › 2007 › XL7 Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instruction › Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake › Installation Procedure

Installation Procedure

Fig 1: Identifying CMP Sensor & Bolt
G04841333Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the CMP sensor.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the CMP sensor bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in)  .

    Fig 2: Connecting Engine Wiring Harness Electrical Connector To Bank 1 Intake CMP Sensor
    G04841334Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the engine wiring harness electrical connector (2) to the bank 1 intake CMP sensor.
  4. Install the air cleaner assembly. Refer to INSTALLATION PROCEDURE .
About FixVault