FixVault
Home › Suzuki › 2007 › XL7 Base, AWD › Repair and Diagnosis › Engine Performance › System › Engine Electrical Devices › Repair Instruction › Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake › Removal Procedure

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector
G04841331Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner assembly. Refer to REMOVAL PROCEDURE .
  2. Disconnect the engine wiring harness electrical connector (2) from the bank 1 intake camshaft position (CMP) sensor.
    Fig 2: Identifying CMP Sensor & Bolt
    G04841332Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
About FixVault