FixVault
Home › Suzuki › 2007 › XL7 Base, FWD › Repair and Diagnosis › Body & Frame › Glass/Windows/Mirrors › Repair Instructions › Front Side Door Window Regulator Motor Replacement › Removal Procedure

Removal Procedure

  1. Remove the front door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT .
  2. Remove the water deflector. Refer to FRONT SIDE DOOR WATER DEFLECTOR REPLACEMENT .
  3. Disconnect the electrical connector from the front door window regulator motor.
    Fig 1: Identifying Window From Regulator (1 Of 2)
    G04845312Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the window from the regulator.
    1. Raise the window.
    2. Tape the window into position.
  5. Remove the front door window regulator motor screws.
About FixVault