Installation Procedure

Fig 1: Applying Drops Of Engine Oil To Male Connection End

Courtesy of SUZUKI OF AMERICA CORP.

WARNING: Refer to FUEL PIPE FITTING CAUTION .

Apply a few drops of clean engine oil to the male connection end.

Fig 2: Pushing Both Sides Of Quick-Connect Fitting
Courtesy of SUZUKI OF AMERICA CORP.
Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.

Fig 3: Pulling Both Sides Of Fitting To Check Connection
Courtesy of SUZUKI OF AMERICA CORP.
Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.