FixVault
Home › Suzuki › 2008 › Swift + › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.6L - Introduction (2 Of 2) › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Disconnecting/Connecting Crankshaft Position Sensor
    GM1289478Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the crankshaft position (CKP) sensor electrical connector.
    3. Fig 2: Removing/Installing CKP Sensor And Bolt
    GM1289479Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault