FixVault
Home › Suzuki › 2008 › XL7 Base, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine General Information And Diagnosis › Diagnostic Information and Procedures › DTC P0446 › Repair Verification

Repair Verification

  1. Ignition ON, seal the EVAP system with a scan tool.
  2. Turn the nitrogen/smoke valve on the J 41413-200 to nitrogen.
    NOTE: DO NOT exceed the specified value in this step. Exceeding the specified value may produce incorrect test results.
  3. Use the remote switch to activate the J 41413-200 and pressurize the fuel tank with nitrogen to 5 inches H20.
  4. While observing the scan tool FTP sensor parameter, command the EVAP vent valve OFF with a scan tool.
  5. Verify the FTP Sensor parameter is 0 inches H2O.
About FixVault