FixVault
Home › Suzuki › 2008 › XL7 Base, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine General Information And Diagnosis › Diagnostic Information and Procedures › DTC P0496 › Repair Verification

Repair Verification

  1. Start the engine.
  2. Command the EVAP vent solenoid closed with a scan tool.
  3. Increase the engine idle to 1,200-1,500 RPM.
  4. Observe the scan tool FTP sensor in H2O parameter.
  5. Verify the scan tool FTP sensor parameter is -0.5 to +0.5 inches H2O.
  6. Clear the DTCs with a scan tool.
About FixVault