FixVault
Home › Suzuki › 2009 › Equator Base, 4D Pickup › Repair and Diagnosis › Engine Performance › System › Engine Control System (VQ40DE) - (5 Of 5) › ASCD Brake Switch Circuit Check › Component Inspection › ASCD Clutch Switch

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G06441665Courtesy of SUZUKI OF AMERICA CORP.
    CONTINUITY SPECIFICATION

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to [CLUTCH PEDAL: ON-VEHICLE INSPECTION AND ADJUSTMENT ], and perform step  3 again.

About FixVault