FixVault
Home › Suzuki › 2009 › Equator Base, 4D Pickup › Repair and Diagnosis › Engine Performance › System › Engine Control System (VQ40DE) - (5 Of 5) › Ignition Signal Circuit Check › Component Inspection › Condenser-1

Component Inspection: Condenser-1

  1. Turn ignition switch OFF.
  2. Disconnect condenser-1 harness connector.
  3. Check resistance between condenser-1 terminals 1 and 2.
    Fig 1: Checking Resistance Between Condenser-1 Terminals 1 And 2
    G06441694Courtesy of SUZUKI OF AMERICA CORP.
    RESISTANCE SPECIFICATION

    Resistance Above 1 MΩ at 25°C (77°F)
About FixVault