FixVault
Home › Suzuki › 2009 › Equator RMZ-4 › Repair and Diagnosis › Engine Performance › System › Engine Control System (VQ40DE) - (3 Of 5) › DTC P2101: Electric Throttle Control Function › Component Inspection › Throttle Control Motor

Throttle Control Motor

  1. Disconnect electric throttle control actuator harness connector.
  2. Check resistance between terminals 5 and 6.
    Fig 1: Checking Resistance Between Terminals 5 And 6
    G06441610Courtesy of SUZUKI OF AMERICA CORP.

    Resistance: Approximately 1 - 15 Ω [at 25 °C (77°F)] 

  3. If NG, replace electric throttle control actuator and go to next step.
  4. Perform "Throttle Valve Closed Position Learning" in [PROCEDURE AFTER REPLACING ECM ].
  5. Perform "Idle Air Volume Learning" in [PROCEDURE AFTER REPLACING ECM ].
About FixVault