Liftgate Switch
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the liftgate switch.
- Test for infinite resistance between the signal terminal A and the ground circuit terminal C with the switch in the open position.
- If not the specified value, replace the liftgate switch.
- Test for less than 2 Ω between the signal terminal A and the ground circuit terminal C with the switch in the closed position.
- If greater than the specified range, replace the liftgate switch.