FixVault
Home › Suzuki › 2011 › Equator Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (Transfer) › Diagnostic Information and Procedures › DTC P1819: Transfer Control Device › DTC Logic › DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSIS PROCEDURE

Step Action YES NO
1  DTC CONFIRMATION PROCEDURE 
  1. Turn ignition switch ON.
  2. Perform "DTC check".

Is DTC P1819 detected? 		 Perform diagnosis procedure. Refer to [Diagnosis Procedure ]. Inspection End.
About FixVault