FixVault
Home › Suzuki › 2011 › Grand Vitara Base › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis › Diagnostic Information and Procedures › DTC P2008: Intake Manifold Runner Control Circuit/Open › DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: Check to make sure that the following condition is satisfied when using this procedure.
  • 0 °C (32 °F) < ECT at engine started < 50 °C (122 °F)
  1. Run engine at idle speed for 20 sec.
  2. Run engine at 3, 500 RPM for 20 sec.
About FixVault