FixVault
Home › Suzuki › 2011 › SX4 Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine General Information And Diagnosis › Diagnostic Information and Procedures › DTC P0620: Generator Control Circuit › DTC Confirmation Procedure

DTC Confirmation Procedure

  1. Warm up engine to normal operating temperature.
  2. Check that the following conditions are met.
    • Blower fan: OFF
    • Headlight switch: OFF
    • Rear defogger switch: OFF
  3. Run engine at idle speed for 5 min. and check to make sure that the following conditions are met.
    • Blower fan: ON
    • Headlight switch: ON
    • Rear defogger switch: ON
  4. Run engine speed at 4,000 rpm and keep it for 30 sec.
About FixVault