FixVault
Home › Suzuki › 2012 › Equator Base › Repair and Diagnosis › Body & Frame › Sun Roof/T-Top/Convertible Top › Diagnostic Information and Procedures › Vehicle Speed Signal Circuit Check › Component Function Check

Component Function Check

COMPONENT FUNCTION CHECK

Step Action YES NO
1  CHECK SUNROOF MOTOR ASSEMBLY INPUT SIGNAL 
  1. Start engine.
  2. Drive the vehicle at more than 40 km/h (25 MPH).
    CAUTION: Always drive vehicle at a safe speed.
    NOTE: This procedure may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle.
  3. Check tilt up/down & slide open/close operations with sunroof switch.

Is the inspection result normal? 		 Inspection End. Refer to [Diagnosis Procedure ].
About FixVault