FixVault
Home › Suzuki › 2012 › Equator Base › Repair and Diagnosis › Electrical › Body Electrical › Power Control System › Diagnostic Information and Procedures › U1000 CAN COMM Circuit › DTC Confirmation Procedure › Diagnosis Procedure

Diagnosis Procedure

DIAGNOSIS PROCEDURE

Step Action YES NO
1  PERFORM DTC CHECK 
  1. Turn ignition switch ON and wait for 2 seconds or more.
  2. Perform "DTC check" of IPDM E/R.

Is "CAN COMM CIRCUIT" displayed? 		 Refer to [LAN SYSTEM: BASIC INSPECTION ] Refer to [SERVICE INFORMATION FOR ELECTRICAL INCIDENT: INTERMITTENT INCIDENT ]
About FixVault