FixVault
Home › Suzuki › 2012 › Equator Base › Repair and Diagnosis › External Pages › Different car › Section 30 (Engine Mechanical) › Repair Instructions › Fuel Injector Sight Shield Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Cover From Ball Studs
G04841443Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the oil fill cap.
  2. Lift upward and remove cover from ball studs.
About FixVault